the headphone stops to work properly

[efgh178]

There are a few common moments that occur in your life especially if we are amongst those who have a passion for music. We all earphones headphones (http://www.goodej2010.com)love listening to music be that to refresh our minds, dance to its tune or even as a hobby. While enjoy it, we face some usual technical interruptions like malfunctioning of the speakers or suddenly the headphone stops to work properly. Instantly, the first reaction that can be seen is either scratching of our own hairs or banging the table top rather than make a desire to fix the gadget or the electronic device.There are screws that hold the case or the cover of a headphone jack. Untwist those screws carefully using a screw driverBose in ear (http://www.goodej2010.com) and open the case. For different devices like a computer, music player etc. Open the case by removing the screws and keep all the screws together in one place so that you lose one.There you will find a circuit board with different connecting wires attached to the jack. Carefully remove the old soldering. Instead you can even overlap the old solder with a new one.After applying the new coat of soldering over the circuit make sure you allow it to cool down before tying the screws. Bose in ear headphones (http://www.goodej2010.com)Note that during soldering the tip of the iron (device used for minor soldering) should not keep melting the metal covering over the circuit for a long time. Otherwise, it will burn the wires connecting to the back of the jack and also the pins.After you reattach the cover with the screws, test it. Plug the headphone in the correct slot before playing. Check whether the soldering was effective enough to fix the headphone. If not perform all the above steps again carefully.Repairing the headphone:www.goodej2010.com/